Blanke Industries Inc.

CO Series 2000

CARBON MONOXIDE EXHAUST GAS ANALYZER


General Description ~ Key Features ~ Applications ~ Specifications ~ Order Information
 
      Carbon Monoxide Gas Analyzer  

GENERAL DESCRIPTION

Put the power of a gas analyzer in the palm of your hand with a new CO Series 2000 Exhaust Gas Analyzer from Blanke Industries. This portable analyzer uses a revolutionary new electrochemical sensor that is smaller and more affordable than traditional chemical and infrared sensors. The analyzer is fast, accurate and easy to use.

The instrument is designed to check CO emissions from any internal combustion engine. It can be used on engines powered by gasoline, propane, natural gas and even diesel fuel. Monitoring exhaust emissions is not only important to help control pollutants, it will also help diagnose performance problems. This tool will quickly determine the general health of an engine. With a CO Series 2000, any engine can be properly tested and repaired to assure ideal engine performance.

KEY FEATURES

  • Portable, hand-held instrument
  • Fast response time
  • Powered by rechargeable NiCad batteries
  • Measures CO concentrations up to 10%
  • Display shows resolution down to 0.01%
  • Large, easy to read, backlit display
  • Low battery indicator
  • Instant on capability, no warm-up time
  • Simple, push-button controls
  • Internal pump and sensor
  • Easily calibrated in the field
  • Protective storage case
  • Flexible stainless steel probe
  • Durable, impact resistant enclosure
  • Backed by a 1 year warranty
  • Made in the U.S.A.

APPLICATIONS

  • Automobiles
  • Motorcycles/ATVs
  • Snowmobiles
  • Marine/Boats
  • Forklifts
  • Floor Sweepers/Scrubbers
  • Personnel/Burden Carriers
  • Generators
Exhaust Probe
General Specifications
 
Batteries Rechargeable NiCad
Typical battery life Over 8 hours of continuous use (1)(2)
Start-up time Instant on, no warm-up
Construction Rugged, fuel and oil resistant, ABS plastic
Sample flow rate Approximately 95 in³/min (1550 ml/min)
Operating temperature 35 to 104°F (2 to 40°C)
Storage temperature 10 to 122°F (-10 to 50°C)
Humidity range 10-90% RH (non-condensing)
User Calibration Monthly or as needed
CO:
Sensor type Electrochemical
Sensor life Typically over 2 years
Range 0-10%
Resolution 0.01%
Response time less than 10 seconds to 90% of reading
Accuracy ±5% of reading
Repeatability ±5% of reading
Physical:
Dimensions 9.3” L × 5.2” W × 1.8” H
Weight 2.93 pounds (1.32 kg)
Display 3½ digit LCD, ¾” digit height, backlit
Probe 12” flexible steel, ½” O.D.
Sample hose 10’ L × ¼” O.D.
Particle filter 5 micron porous nylon

(1) Typical battery life is based on proper charge/discharge practices.
(2) Using the backlight feature will reduce the typical battery life. All specifications and features are subject to change without notice.
© Copyright 2000 Blanke Industries, Inc. All rights reserved.

 

ORDER INFORMATION

 
Exhaust Gas Analyzer

CO Series 2000: Includes CO analyzer, 10’ exhaust sample hose with flexible probe (½” O.D.), narrow flexible probe (¼” O.D.), water separator/particle filter, rechargeable NiCad battery pack, 110 VAC adapter/charger and protective storage case

 
Optional Accessories
  • Calibration kit (without calibration gas), No. CK-050
  • Calibration gas cylinder (1.0% CO), No. CG-010
  • Calibration gas cylinder (4.0% CO), No. CG-040
  • Oil removal filter, No. CF-100
  • 20' Exhaust sample hose, No. SH-020
 
Replacement Parts
  • 10’ Exhaust sample hose, No. SH-010
  • Flexible probe (½” O.D.), No. FP-050
  • Narrow flexible probe (¼” O.D.), No. FP-025
  • Particle filters (pack of 6), No. PF-605
  • Rechargeable NiCad battery pack, No. BP-060
  • CO sensor, No. COS-100

Home | Products | Company Information | What's New | Contact Us


Blanke Industries Inc.
1099 Brown Street #103
Wauconda, IL 60084-3106

Phone: 847-487-2780 | FAX: 847-487-2799
Material Copyright 2007 Blanke Industries Inc.