...the exhaust experts

 

Home

Company Info

Contact Us

Products


Solutions for...

Industrial Trucks

Motorcycles

Osha compliance


FAQs


Technical Info


Success Stories


What's New?

CO Series 2500
and Optional Printer

CARBON MONOXIDE EXHAUST GAS ANALYZER

General DescriptionKey FeaturesApplicationsSpecifications

Order Information

Carbon Monoxide Analyzer

GENERAL DESCRIPTION

Put the power of a gas analyzer in the palm of your hand with a CO Series or 2500 Exhaust Gas Analyzer from Blanke Industries. These portable analyzers use a revolutionary new electrochemical sensor that is smaller and more affordable than traditional chemical and infrared sensors. The analyzers are fast, accurate and easy to use.

The instruments are designed to check CO emissions from any internal combustion engine. They can be used on engines powered by gasoline, propane, natural gas and even diesel fuel. Monitoring exhaust emissions is not only important to help control pollutants, it also helps maintain optimum fuel efficiency and extend engine life. These tools will quickly determine the general health of an engine. With a CO Series 2500 Analyzer, any engine can be properly tested and repaired to assure ideal engine performance.

KEY FEATURES

  • Portable, hand-held instrument
  • Rechargeable printer (optional)
  • Record test results (with optional printer)
  • Fast response time: less than 10 seconds to 90%
  • Powered by rechargeable batteries
  • Measures CO concentrations up to 10%
  • Displays resolution down to 0.01%
  • Large, easy to read, backlit display
  • Low battery indicators
  • Instant “on” capability, no warm-up time
  • Simple, push-button controls
  • Internal pump and sensor
  • Protective storage case
  • Durable, impact resistant enclosure

APPLICATIONS

  • Automobiles
  • Motorcycles/ATVs
  • Snowmobiles
  • Marine/Boats
  • Forklifts
  • Floor Sweepers/Scrubbers
  • Personnel/Burden Carriers
  • Generators
General Specifications
 
Batteries Rechargeable NiCad
Typical battery life Over 12 hours of continuous use(1)(2)
Start-up time Instant “on”, no warm-up
Construction Rugged, fuel and oil resistant, ABS plastic
Sample flow rate Approximately 72 in³/min (1180 ml/min)
Operating temperature 35 to 104°F (2 to 40°C)
Storage temperature 10 to 122°F (-10 to 50°C)
Humidity range 10-90% RH (non-condensing)
User Calibration Monthly or as needed
CO:
Sensor type Electrochemical
Sensor life Typically 3-5 years
Range 0-10%
Resolution 0.01%
Response time Less than 10 seconds to 90% of full scale
Accuracy ±5% of reading (3)
Repeatability ±5% of reading (3)
Physical:
Dimensions 9.3” L × 5.2” W × 1.8” H
Weight 2.40 pounds (1.09 kg)
Display 3½ digit LCD, ¾” digit height, backlit
Probe(s) 12” flexible steel, ½” O.D.
 & ¼” O.D.
Sample hose 10’ length × ¼” O.D.
2 stage filter 75 micron particle, 5 micron oil removal

ORDER INFORMATION

CO Series 2500:
Includes CO analyzer, 10’ exhaust sample hose with flexible probe (½” O.D.), narrow flexible probe (¼” O.D.), water separator w/ 2 stage filter, replacement filters (1 set), 110 VAC adapter/chargers and protective storage case

CO Series 2500 Carbon Monoxide Exhaust Gas Analyzer

Shown with optional thermal printer (DP-414)

Optional Accessories
  • Printer Accessory (Printer Upgrade), No. DP-414
  • Calibration kit (without calibration gas), No. CK-050
  • Calibration gas cylinder (1.0% CO), No. CG-010: ideal for fork lifts
  • Calibration gas cylinder (4.0% CO), No. CG-040: ideal for motorcycles

2007 Blanke Industries, Inc.

Top of Page


2007 Blanke Industries Inc.

Blanke Industries Inc.
1099 Brown Street #103
Wauconda, IL 60084-3106

Phone: 847-487-2780 | FAX: 847-487-2799

Contact Us